Support Moderator
Joined: 22 Sep 2003 Posts: 1949 Location: Arcata, CA
|
Posted: Thu Mar 08, 2007 9:14 am Post subject: |
|
|
In order to start the siphon, all the air needs to be removed from the inside of the overflow. We recommend attaching an Aqua Lifter pump to the air nipple on top of the box to start and maintain siphon in the box. If you do not have any pump attached to the air nipple, a check valve will be needed to stop air from leaking into the box.
Please describe your set-up with more detail if further assistance is needed. Read over the set-up directions again or check out the video posted at the top of this forum for a visual aid on starting up a CS Overflow. |
|