CPR AQUATIC SPECIALTY PRODUCTS & ACCESSORIES

Along with quality filtration systems, CPR Aquatic offers a small line of specialty products and accessories for aquarium hobbyists.

NEW CPR LARVAE CATCHER

Introducing the new Larvae Collector for you aquarium! This unique device is designed to lure nocturnal creatures towards the light source, only to be trapped for your collection. This is an easy way to collect larvae and move to a separate tank for development.

LARVAE CATCHER FEATURES:

  • Nocturnal collection device for aquatic hobbyists and breeders
  • Easily collect fish larvae- no more sleepless nights with a net and flashlight
  • Capture plankton and other nocturnal creatures that are active during the night- see what swims about while you are asleep
  • Flow rate design gently draws in larvae and other nocturnal animals, safely housing them until morning
  • Includes pump, magnet mount and battery operated LED light (battery included)

-Dimensions 10 3/8"L x 4 1/4"W x 8 1/4"H


AQUARIUM SURFACE VIEWER

A unique accessory from CPR Aquatic is the Aquarium Surface Viewer. This surface viewer provides hobbyists with a more "natural" view of their tank inhabitants from the surface of the aquarium. This handy viewer can also be used in tide pools or any other body of water. By smoothing out the ripples along the water surface, users get a clear picture of what's below. Great for helping capture detailed photos of corals and fishes from above!

-Dimensions 8"L x 8"W x 4"H


NEW SOCK-IT PRE-FILTERS

  • Mechanical filtration made easy
  • Easily add a filter sock to most any sump (vertical or euro-braced tanks)
  • Tinted body and adjustable bracket height
  • Adjustable length inlet too reduce noise and splashing
  • Inlet connects to standard 1" fittings, pipe and hose
  • Fits onto vertical rims less than 1.25” thick and euro-bracing less than 0.50” thick
  • Comes in 2 sizes and 6 configurations; with 200 micron pre-filter sock (DX) or without sock (Reg.)

FILTER SOCK HOLDER

The CPR Filter Sock Holder is a simple sock holder using a gasket and acrylic holder, which allows users to add a filter sock to almost any 1" drain or outlet. This is a very simple and inexpensive way to add mechanical filtration to any of your 1" outlets such as overflows and skimmer outlets. See the chart below for some of the primary differences between the Sock-It and the FSH.

FEATURE FSH Sock-It
Models for 4" and 7" filter socks X X
Attaches to 1"ID Sch40 PVC and similar tubing X X
simply connects to skimmer (and overflow) outlets X

N/A
Securely attaches to sump rims N/A X
Dual inlet / Single sock option N/A X
Splash and overflow guard N/A X

Below is a list of accessories to help make your aquarium system more efficient.

LARC: Larvae Collector
Dimensions (L x W x H): 10.375" x 4.25" x 8.25"
Includes: One LED light and One Magnet Mount

AQUARIUM SURFACE VIEWER

Dimensions (L x W x H) 8" x 8" x 4"

The CPR SOCK-IT was released during the Spring of 2011 as a a replacement to the SIHA line. See the images of the new models below (DX Models shown).

SOCK-IT HOLDERS

SCKIT4: 4" Acrylic Holder
Dimensions (L x W x H): 4.75" x 4.75" x 2.375"
Includes: One 1" ID PVC inlet adapter
Pre-Filter Bag: 4" - 200 micron (DX MODELS)
SCKIT71: 7" Acrylic Holder
Dimensions (L x W x H): 8.375" x 7" x 2.5"
Includes: One 1" ID PVC inlet adapter
Pre-Filter Bag: 7" - 200 micron (DX MODEL)
SCKIT72: 7" Acrylic Holder
Dimensions (L x W x H): 8.375" x 7" x 2.5"
Includes: Two 1" ID PVC inlet adapters
Pre-Filter Bag: 7" - 200 micron (DX MODELS)

FILTER SOCK HOLDER

Includes Acrylic Holder and Gasket
Sizes: 4" and 7" Filter Socks

return to the products page